How to Remove a Sliding Glass Door Latch
One of the most important parts of a sliding glass door is the latch. In actual sense, there is no other small part that is as important as this part is. The goodness of the sliding door is determined by its sliding glass door latch. It helps in preventing the sliding glass door from being pried open. As time goes by, the latch catches rust and becomes worn out. This means that you will have to either repair or replace them. With a proper guide, it should not be a difficult exercise for you to remove the sliding door latch. This information will be very useful for you when removing your door latch.
Step 1 - Locating the Sliding Glass Door Latch
It is imperative that you get to locate the sliding door latch before you begin to remove it. Actually, it is impractical to remove what you have not located. For the latch, you will realize that it is located at the center of the frame where the door closes. Start by unlocking the sliding glass door and open it. Take a look at the edge of the sliding glass door to locate the sliding glass door lock. If you have some problems with your sliding patio doors, rollers or bolts, just email us firstname.lastname@example.org 24/7.
Step 2 - Screw Removal
You should then proceed to remove the screws attaching the sliding glass door latch to the door itself. Usually, the door latch is attached to the sliding glass door from a number of screws. Among these screws, there are those that are exposed and easily accessible while there are others that are concealed. The first set of these screws are placed on the side of the sliding door. They hold the door’s handle in its position. These are just two screws that you will have to remove. After you have removed these screws from the sliding door, carefully remove the handles and put them aside.
Check on the front side to locate the sliding door latch. The screws used here could either be visible or invisible. It all depends on the model you are handling. The screws here are supposed to be connecting sliding glass door lock to the frame. When you locate them, you will realize that they are two screws that hold together the latch which have to be removed. You should unscrew them to remove. The edges of the sliding glass door frame usually have some small screws. You should remove these screws also.
Step 3 - Prying the Sliding Glass Door Frame Apart
If at all you have the right mechanism and knowledge, then you should be able to remove the sliding door latch before you take the frame apart. When you are done removing all the screws, you should be able to easily pull out the sliding door latch. This depends on the model of the door that you will be handling. In the event that the sliding door latch is still stuck in the door’s frame, then you will be forced to pry away the frame from the latch. Just insert the pry bar in between one side of the frame and the sliding door latch and slowly push the pry bar. The frame will get to move aside away from the central stud. Check on the other side of the frame and do the same. This will grant you an opportunity to access the internal area and to locate the remaining screws in the sliding door latch. Remove the screws and gently remove the sliding door latch with the help of a friend. Take the measurements of the sliding glass door latch. Take these measurements and if possible the latch you have just removed to the hardware. Ensure you get a compatible one with what you removed. Put it back in place and screw it on the door.
Remove them and then remove the sliding glass door latch. Measure the sliding glass door latch and purchase one of the same sizes. Put it in place and replace the screws.