Building a Sliding Barn Door

You most definitely prefer a sliding barn door for its convenience. Sliding doors are able to remain out of the day compared to the non-slide doors. When opened, such doors can hinder movement in some spaces either inwardly or outwardly. Sliding doors also have the advantage of operating effectively in the face of harsh weather. Lately, sliding barn doors have become popular for outdoor spaces too especially within homes. You might be interested in building these doors on your own to cut on costs associated with buying a new one. In this guide, we take though some simple steps that will make your desire attainable.

Building a Sliding Barn Door

First Step: Board Cutting

You will first have to take measurements of the barn door opening for purposes of precision. Ensure that you measure both the length and the width. Use these measurements to cut the board that you will use in constructing the frame. Strong frames are made using double-stacked 2x4s or alternatively use 4-by-4 wood beams. If you have some problems with your sliding glass doors, wheels or bolts don't estimate to call (877) 299-9179 24/7.

Second Step: Assembling the Frame

In this step, you should ensure that you have both metal braces and galvanized screws. In place of the screws, you can also use nails in assembling the frame. Cross braces are effective when attaching small frames to the center. On the other hand, the diagonal brace is more effective when making large barn doors. They are used in either half of the frame.

Third Step:  Placing the Planks

In this step, first, place the planking and cut it in an equal height to that of the barn door. Use either nail or galvanized screws to attach them to the door frame. To enhance the strength of these screws, add drops of wood glue on each of the screws.

Fourth Step: Track Mounting

You can now mount the track onto the frame. Ensure that you mount the track on top of the frame and fasten using screws. To enhance the accuracy of the alignment, use a level.

Fifth Step: Adding the Wheels

You most definitely want your door to be sliding smoothly. Mount three to four of these wheels on the bottom of the door. There are those instances in which the door could be higher compared to the barn foundation. This calls for using a bottom track.

Sixth Step: Wall Tracks Installation

Accuracy in measurements is very important in this step. After you have assembled the sliding barn door, take the measurements of track lengths on the frame. Install tracks of the size onto the barn walls. This will be very helpful in the retraction of the door. The wall track should be longer. This will effectively ensure that the door is effective gets off the doorway whenever it is in a retracted position.

Seventh Step: Decorating Your Door

A good finish and decoration give your house an attractive look. You can make your sliding barn door attractive before you attach it. Simply paint the door with the color you desire. Some homeowners prefer decorative painting as opposed to plain painting. It is up to you to decide. The most important factor to take into account is that the outer door must be painted using weather-resistant paint. Other additional components such as locks should also be added at this point to enhance security.

Eighth Step: Performing Maintenance

From time to time, you should maintain your door. The tracks usually attract dust. Clean them to remove any dust particles and debris that might have occurred in them. You will also have to inspect the track wheels often to assess their condition. When wheels are well maintained and lubricated, they will have longer lives.